|
PRODUCTS
Automatic
pool
cleaners
Above-ground
pool equipment
Alternative
Sanitizers
Blowers
Chlorinators
Filters
Heaters
Natural/Propane gas
Spa & Above-Ground
Leaf
Canister
Leaf
Net
Lighting
Maintenance / Accessories
Patio
Heaters
Pool Cleaner Parts
Pool/Spa
Automation
Control System
Pool
Slide
Pumps
Replacement
Cartridges
Replacement
DE grids
Replacement
Motors
Salt
Chlorine Generator
Pool Safety
Covers
Submersible
Pumps
Solar
Blanket /Covers
Solar
Reels
Solar
Heating
Timer
- clocks
Water
Purifier
Water Features
Valves
& Actuators
Policy/Warranty
TOLL FREE
(888) 284-6007
(626) 839-1914
Email & Information
| |
|
Jandy
PURE LINK System with Chlorine Generator = PDA |
| |
|
The PureLink incorporates the AquaPure Water
Purification System Electroics into the Aqualink RS Power Center for a
simple and convenient installation. Add the benefits of water
purification to your pool and spa control system. |
POWER CENTER
PURELINK CELL KIT
|
|
NO NEED TO GET
OUT OF THE SPA |
|
Utilizing WiFi technology, the Jandy PDA has the power and range to control
jets, lights, pool to spa switching, temperature settings, water
purification and more. All this power at your finger tips while you
are soaking in the spa, relaxing on the hammock or lounging in the cabana. |
|
PUT TOGETHER
THE PERFECT SYSTEM |
|
PureLink Power Center The PureLink
all-in-one Power Center incorporates the AquaPure PCB's and transformer into
the AquaLink RS sub-panel Power Center for installation convenience.
The PureLink Power Center is available in two models for pools up to 15,000
gallons or 40,000 gallons.
PureLink Cell Kit (sold separately)
The PureLink Cell Kit contains the cell,
sensor and cables neccessary for plug-n-play installation into the PureLink
Power Center. The PureLink Cell Kit is available in two models to
match your PureLink Power Center Selection. The PureLink automatically
cleans the cell every 3 hours without interrupting the production of
chlorine.
|
|
TOTAL CONTROL,
IN THE PALM OF YOUR HAND |
| |
| PDA,
OneTouch or All Button Controllers can fully control the Jandy chlorine
generator throug the new PureLink Power center.
Water Purification levels can be controlled from
the main menu of the AquaLink RS controller (All Button, OneTouch or PDA) or
may be adjusted from the PureLink Power Center while the AquaLink RS is
online. Boost chlorine production and monitor purification levels from
the wired or wireless handheld controller.
- Pool to spa switching
- Filter pump cycles
- Heater control and temperature settings
- Program on and off times
- Yard lights
- Water features
- Pool/Spa sanitization levels
- Pool/Spa colored lights
|
 |
|
Step 1: Select one of PDA
system |
| PDA-PS4 |
Pool & Spa, Filter pump, Heater,
1-3 aux. |
$736.00 |
ORDER |
| PDA-PS6 |
Pool & Spa, Filter pump, Heater,
1-5 aux. |
$912.00 |
ORDER |
| PDA-PS8 |
Pool & Spa, Filter pump, Heater,
1-7 aux. |
$1080.00 |
ORDER |
|
Step 2: Select one of Power
Center for 15K or 40K gallons |
| 6614AP700 |
PureLink Power Center for 15,000
gallons |
$535.00 |
ORDER |
| 6614AP1400 |
PureLink Power Center for 40,000
gallons |
$580.00 |
ORDER |
|
Step 3: Select one of
PureLink Cell for 15K or 40K gallons |
| PLC700 |
PureLink Cell Kit for 15,000
gallons capacity |
$363.00 |
ORDER |
| PLC1400 |
PureLink Cell Kit for 40,000
gallons capacity |
$508.00 |
ORDER |
|
Additional Relays & Valve Actuators & Power Center |
|
|
|
 |
 |
|
JVA4424 |
3HP POWER RELAY |
Use this Standard Power Center
without Chlorine System |
Use this Sub Panel Power
Center without Chorine System |
|
$215.00
ORDER |
$45.00
ORDER |
$320.00
ORDER |
$360.00
ORDER |
| |
|
Required PDA system |
Required PDA system |
| |
|
IntelliChlor |
|
 |
|
